Tracked Carrier Hire
in Melbourne
Compact Tracked Carriers for Restricted Access Material Transport
A tracked carrier is a compact, self-propelled machine that moves heavy loads horizontally across sites in Melbourne, Geelong, Bacchus Marsh, and Western Victoria, passing through narrow openings and over ground that wheeled equipment cannot cross. Most units are under a metre wide, run on rubber tracks, and carry between several hundred kilograms and a couple of tonnes.
They exist because lifting is only half the problem on a tight site. Getting the load from the truck to the lift point is often the harder part, and that is the job a tracked carrier does.
The Machine That Solves
the Other Half of the Job
Cranes lift. Carriers move. On most constrained sites, you need both, and the second one is usually the part nobody plans for. The typical scenario runs like this. A delivery arrives at the curb, the lift point is forty meters away through a side gate, down a path and around a corner, and the load weighs more than a crew should be carrying by hand. A forklift will not fit and will not cope with the surface. Everything stops. A tracked carrier drives straight through that route under its own power, carries the load on a flat deck or in a tipping body, and spreads its weight across rubber tracks so lawns, paving, decking and finished floors survive the trip. Electric models work indoors with no exhaust at all. Tell us the load, the distance, and the narrowest point on the route.
What Tracks Do That Wheels Cannot
Five capabilities explain why this machine exists:
Passes through narrow openings. Compact widths clear standard doorways, side gates, corridors and basement ramps without dismantling anything.
Low ground bearing pressure. Weight distributed across rubber tracks, protecting lawns, paving, decking, tiled floors and suspended slabs.
Climbs and descends gradients. Handles slopes, ramps and steps that stop trolleys, pallet jacks and wheeled barrows entirely.
Electric and emission-free operation. Battery and mains-powered units suitable for indoor work, occupied buildings and enclosed spaces.
Remote-controlled precision. Radio control lets the operator stand clear and position the load accurately in confined areas.
What Tracks Do That Wheels Cannot
Five capabilities explain why this machine exists:
Passes through narrow openings.
Low ground bearing pressure.
Climbs and descends gradients.
Electric and emission-free operation.
Remote-controlled precision.
Tracked Carriers Hire in Melbourne
Tracked Carriers Hire in Melbourne
4T Tracked Carrier
2.5T Tracked Carrier
1.25T Tracked Carrier
Plenty of jobs need a carrier and a crane together, and we supply both from the one booking. Work out the lifting side with the crane calculator, then send us the transport requirement as well.
Where TrackedCarriers Get Used
Glazing and Panel Delivery
Glass units, stone panels and facade sections moved from the delivery point to the installation position without manual handling risk.
Landscaping and Residential
Pavers, soil, turf, plants, retaining blocks and rock carried into rear yards through side gates too narrow for any wheeled machine.
Building Fit Out and Refurbishment
Materials, fixtures, joinery and equipment transported through occupied buildings, corridors and lift lobbies with electric units.
Industrial Maintenance and Shutdowns
Tools, spares, valves and components moved through operating plants and refineries where vehicle access is restricted.
Rail, Utilities and Civil Corridors
Sleepers, cable drums, pipe sections and equipment carried along easements, tracksides and confined civil corridors.
Demolition and Strip Out
Debris, fixtures and salvaged material removed from inside buildings where skips cannot be positioned close to the work.
Call us now at 0457 000 637.
How the Hire Works
How the Hire Works
Four steps, one phone call. Start yours now.
Four steps, one phone call. Start yours now.
Send the route and the load
What is being moved, how heavy it is, how far it travels, and the narrowest and steepest points along the way.
Send the route and the load
What is being moved, how heavy it is, how far it travels, and the narrowest and steepest points along the way.
Machine matched and quoted
Capacity checked against the gradient, power option selected, body type confirmed, and a quote issued with transport itemized.
Machine matched and quoted
Capacity checked against the gradient, power option selected, body type confirmed, and a quote issued with transport itemized.
Delivery arranged
Dates locked to your program, site access times confirmed, and charging or fuelling arrangements sorted before the machine arrives.
Delivery arranged
Dates locked to your program, site access times confirmed, and charging or fuelling arrangements sorted before the machine arrives.
On site and working
Unit floated in, tracked to the start of the route, work completed, then collected at the end of the hire.
On site and working
Unit floated in, tracked to the start of the route, work completed, then collected at the end of the hire.
What Comes With a Tracked Carrier?
Six things covered as part of the hire:
Route assessment first. Access widths, gradients, surfaces, corners and floor loadings checked before a machine is committed.
Operator or induction supplied. Wet hire with a trained operator, or machine familiarisation where your crew will run it.
Surface protection available. Track mats, ply and matting where finished floors and soft ground need covering.
Correct body configuration. Flat deck, tipping body or attachment selected for what is actually being moved.
Charging and power sorted. Electric unit charging requirements confirmed against available site power before delivery.
Float transport arranged. Delivery, positioning and collection built into the quote.
What Comes With a Tracked Carrier
Six things covered as part of the hire:
Every Lift Meets Safety Standard
What is a tracked carrier?
A tracked carrier is a compact, self-propelled machine that transports heavy loads across ground on rubber tracks. It is designed for sites where access is too narrow, too soft, or too uneven for wheeled equipment, and where manual handling would be unsafe or impractical.
What is a tracked carrier used for?
Moving materials horizontally on restricted sites. Common uses are glazing and panel delivery, landscaping supplies into rear yards, fit-out materials through occupied buildings, and equipment transport through industrial plants during maintenance.
How much can a tracked carrier carry?
Compact units in this class typically carry from several hundred kilograms up to around two tonnes on level ground. Capacity reduces on slopes, so we always confirm the rated figure against your actual route gradient.
How wide is a tracked carrier?
Most compact carriers are under a meter wide, and the narrowest models fit through standard single doorways. Send us the tightest point on your access route with a photo, and we will confirm which unit fits.
Can a tracked carrier be used indoors?
Yes. Electric and battery-powered units produce no exhaust emissions and run quietly, which makes them suitable for occupied buildings, warehouses and enclosed spaces. Floor loading and headroom still need checking first.
What is the difference between a tracked carrier and a tracked dumper?
A carrier moves discrete items such as panels, equipment and materials, usually on a flat deck. A tracked dumper carries loose bulk material such as soil and rubble in a tipping body. Some machines do both, but they are built around different jobs.
Do I need a tracked carrier or a mini crawler crane?
If the problem is getting the load to the work area, you need a carrier. If the load has to be lifted into position, you need a crane. Many tight access jobs need both, and we supply them together.
Do you offer dry hire?
Wet hire with an operator is the standard arrangement. Dry hire can be arranged where your crew is trained and competent on the machine, subject to induction and site requirements.
What does tracked carrier hire cost in Melbourne?
Daily and weekly rates apply, with weekly hire working out significantly better on longer programs. Float transport from our Maddingley depot is quoted separately. Call 0457 000 637 for a figure against your job.
Which areas do you cover?
All Melbourne metro suburbs, with Maidstone, Werribee and Caroline Springs among the areas we attend most often, extending through Geelong, Bacchus Marsh, Melton and Ballarat. Regional work is arranged on request.
Get Answers to Your Crane Hire Questions
Get Answers to Your Crane Hire Questions
Find answers to common questions about our crane hire services, equipment, operators, and project support.
0457 000 637
Open 24 hours
25 Rowsley Station Rd, Maddingley VIC 3340
Contact Us
Carriers travel on a float from our depot at 25 Rowsley Station Rd, Maddingley VIC 3340, directly on the Western Freeway. Because these machines usually stay for the duration of a work package rather than a single day, transport applies once, and the unit remains available across the whole program.