3-Axle All Terrain Crane Hire Melbourne
50T, 55T & 60T All Terrain Cranes for Construction, Plant and Long-Reach Lifting
Crane2U provides 3-axle all terrain crane hire across Melbourne and Regional Victoria for commercial construction, structural steel, precast work, rooftop plant, machinery installation, civil projects and other lifts that need more capacity and reach than compact crane classes while retaining practical road mobility and site setup.
The 3-axle range includes 50T, 55T and 60T all terrain cranes. The right crane is not selected on tonne rating alone. Load weight, working radius, required hook height, access width, outrigger setup, ground conditions, overhead restrictions and the final placement point all affect crane selection and available capacity.
Send Crane2U the site address, load details, approximate radius, required height and site photos or drawings. The team can review the lift against the relevant crane data and recommend a suitable 50T, 55T or 60T option together with any operator, rigging, spotter, lift-planning or traffic-management support required.
50T All Terrain Crane
55T All Terrain Crane
60T All Terrain Crane
Unsure which crane suits your job? Send us your load weight, dimensions, and site photos, and we will recommend the best crane, supported by load charts. Not sure which Franna fits? Work it out in seconds with our Franna crane calculator, or send us your load details and we will match the crane for you.
Compare the 3-Axle Range
Crane | Best suited to | Selection note | Page |
50T | Commercial steel, rooftop plant, machinery, construction materials | Good starting point where the lift fits the verified chart and site setup | 50T page |
55T | Industrial equipment, precast, larger steel, longer-radius work | Step up when additional capacity is needed at the required radius | 55T page |
60T | Heavier plant, larger structural lifts, civil support, complex placements | Highest nominal capacity in this group; confirm actual chart capacity | 60T page |
*Manufacturer published values depend on configuration and attachments. These are not lifting capacities at the stated height or radius. Final crane selection must use the applicable load chart and actual lift configuration.
Need a High-Capacity Crane for Your Next Project?
Tell us what is being lifted, where it needs to go and what setup space is available. Crane2U can review whether the 150T, 230T or 250T five-axle crane is suitable and identify any lift planning, rigging, transport or traffic-management requirements.
Crane Hire & Site Support in One Place
Depending on the lift, Crane2U can coordinate the crane together with supporting crew and project services.
Wet & Dry Crane Hire
Flexible crane hire options matched to the project, crew requirements and operating arrangements.
Engineered Lift Planning
Planning support for complex or higher-risk lifts, including lift methodology and site considerations.
Dogman & Riggers
Qualified lifting support for rigging, load control, signalling and safe crane operations.
Electrical Spotters
Qualified spotter support for crane and plant operations near electrical hazards and powerlines.
Transport Services
Transport support for machinery, equipment and project materials across Melbourne and Regional Victoria.
Welding & Fabrication
On-site welding and fabrication support for steel work, modifications, repairs and project requirements.
WHY THIS EQUIPMENT
WHERE 3-AXLE CRANES WORK WELL
WHAT TO SEND FOR A QUOTE
3-Axle Crane Hire Across Melbourne & Regional Victoria
Crane2U can assess 3-axle crane hire throughout Melbourne and Regional Victoria, including Melton, Bacchus Marsh, Maddingley, Werribee, Caroline Springs, Maidstone, Geelong, Ballarat, Gisborne and surrounding Western Victoria locations. For other areas, send the project address so mobilisation can be reviewed. View all service areas or send the site address for a mobilisation assessment.
Crane Hire Process
- Send the lift information and site photos/plans.
- Crane2U checks whether this crane is suitable or recommends another fleet option if the lift requires a different capacity, reach or footprint.
- Crew, rigging, spotter, lift-planning and transport requirements are confirmed where applicable.
- The crane is mobilised, set up and operated according to the agreed project scope.
Available Support:
- Experienced crane operator for wet hire where applicable
- Dogman and rigging support available as required
- Electrical spotters available for relevant electrical hazards
- Engineered lift planning available for complex lifts
- Transport and site support can be coordinated with the booking
Get Answers to Your Crane Hire Questions
Find answers to common questions about our crane hire services, equipment, operators, and project support.
What is a 3-axle all terrain crane used for?
Three-axle all terrain cranes are commonly used for commercial construction, structural steel, rooftop plant, machinery installation, precast work, civil projects and other lifts that need mid-range capacity and reach.
What is the difference between the 50T, 55T and 60T cranes?
The nominal capacity class increases from 50T to 60T, but the usable capacity for a specific job depends on the exact crane model, boom configuration, counterweight, outrigger setup and working radius. Crane2U should check the current load chart rather than selecting on tonne rating alone.
Can a 3-axle crane lift rooftop equipment?
Often, yes. Rooftop lifts are a common use for this class, but the required height and radius must be checked against the actual crane configuration and site setup.
Do you provide operators and rigging support?
Crane2U can coordinate crane operators, dogmen, riggers, electrical spotters and lift-planning support where required for the project.
Which areas do you service?
Crane2U services Melbourne and Regional Victoria, including Melton, Bacchus Marsh, Werribee, Caroline Springs, Maidstone, Geelong, Ballarat, Gisborne and surrounding Western Victoria areas.
What information should I send for a quote?
Send the site address, load weight and dimensions, pick and set points, approximate radius, required height, access details, ground conditions and site photos or drawings.