2-Axle All Terrain Crane Hire Melbourne
30T & 40T Liebherr Cranes for Compact, Mobile and High-Reach Lifting
Crane2U provides 2-axle all terrain crane hire across Melbourne and Regional Victoria for construction, structural steel, rooftop plant, machinery installation, building materials and projects where a compact crane footprint is important. The two-axle range includes the Liebherr LTM 1030-2.1 (30T) and LTM 1040-2.1 (40T), combining road mobility with practical reach and lifting capability for urban, commercial and industrial sites.
Crane selection should be based on the actual lift, not tonne rating alone. Send the load weight and dimensions, pick and set positions, approximate working radius, required hook height, access width, setup area, ground conditions and site photos or drawings. Crane2U can review the relevant load chart and recommend the suitable crane, crew and supporting services.
Choose Your 2-Axle All Terrain Crane
30T All Terrain Crane
40T All Terrain Crane
Unsure which crane suits your job? Send us your load weight, dimensions, and site photos, and we will recommend the best crane, supported by load charts. Not sure which Franna fits? Work it out in seconds with our Franna crane calculator, or send us your load details and we will match the crane for you.
2-Axle Crane Comparison
Specification | Verified manufacturer data |
|---|---|
Maximum load capacity | 30 t |
Rated capacity reference | 30 t at 3.0 m radius |
Telescopic boom | 9.2 m to 30.0 m |
Lattice jib | 8.6 m to 15.0 m |
Maximum hoist height | 44 m |
Maximum radius | 40.0 m |
Number of axles | 2 |
Drive / steering | 4 x 4 x 4 |
Driving speed | up to 85 km/h |
Total ballast | 5.5 t |
Important: maximum rated capacity is only available in specific configurations and at short radius. Actual lifting capacity depends on working radius, boom configuration, counterweight, outrigger setup and the manufacturer load chart.
Crane Hire & Site Support in One Place
Crane2U can coordinate the crane with project support based on the lift scope. Relevant services include wet or dry crane hire where applicable, engineered lift planning, dogmen and riggers, electrical spotters, transport support and site-specific lifting assistance.
Wet & Dry Crane Hire
Flexible crane hire options matched to the project, crew requirements and operating arrangements.
Engineered Lift Planning
Planning support for complex or higher-risk lifts, including lift methodology and site considerations.
Dogman & Riggers
Qualified lifting support for rigging, load control, signalling and safe crane operations.
Electrical Spotters
Qualified spotter support for crane and plant operations near electrical hazards and powerlines.
Transport Services
Transport support for machinery, equipment and project materials across Melbourne and Regional Victoria.
Welding & Fabrication
On-site welding and fabrication support for steel work, modifications, repairs and project requirements.
WHY THIS EQUIPMENT
Where 2-Axle All Terrain Cranes Work Best
HOW HIRE WORKS
2-Axle Crane Hire Across Melbourne & Regional Victoria
Crane2U can assess 2-axle crane hire throughout Melbourne and Regional Victoria, including Melton, Bacchus Marsh, Maddingley, Werribee, Caroline Springs, Maidstone, Geelong, Ballarat, Gisborne and surrounding Western Victoria locations. For other areas, send the project address so mobilisation can be reviewed. View all service areas or send the site address for a mobilisation assessment.
Need a Reliable Crane for Your Next Project?
Tell us what you are lifting, where it needs to go and what access is available. Crane2U can recommend a suitable crane and supporting services for the job.
Crane Hire Process
- Send the lift information and site photos/plans.
- Crane2U checks whether this crane is suitable or recommends another fleet option if the lift requires a different capacity, reach or footprint.
- Crew, rigging, spotter, lift-planning and transport requirements are confirmed where applicable.
- The crane is mobilised, set up and operated according to the agreed project scope.
Available Support:
- Experienced crane operator for wet hire where applicable
- Dogman and rigging support available as required
- Electrical spotters available for relevant electrical hazards
- Engineered lift planning available for complex lifts
- Transport and site support can be coordinated with the booking
We proudly support the construction, civil, commercial, residential and industrial construction sectors, along with infrastructure, mining, manufacturing, logistics and warehousing clients throughout Victoria. If your load is not listed here, give us a ring; chances are we have lifted one just like it.
Call us now at 0457 000 637.
What Our 2-Axle All Terrain Crane Can Lift
Steel Erection
Dependable support for precast concrete panel installation and handling across commercial, civil and large residential construction projects statewide.
Machinery Relocation
Factory machinery moves and equipment installation handled with complete care, including tight-access positioning inside busy sheds and warehouses.
Roof Truss Installation
Fast, safe roof truss lifts that keep your carpenters productive and your building program running right on track.
Concrete Panel Work
Dependable support for precast concrete panel installation and handling across commercial, civil and large residential construction projects statewide.
Containers & Portable Buildings
Shipping containers, site sheds and modular portable buildings lifted, carried and set down exactly where you want them.
Plant Maintenance & HVAC
Shutdown support plus generators, transformers and switchboards and HVAC units installed safely and efficiently for factories, plants and facilities.
What is a 2-axle all terrain crane?
A two-axle all terrain crane is a compact mobile crane designed for road travel and crane setup on site. It uses outriggers for lifting and is useful where a smaller carrier footprint, practical reach and road mobility are important.
What 2-axle cranes does Crane2U offer?
The supplied two-axle range includes the Liebherr LTM 1030-2.1, rated by Liebherr at 35 t maximum capacity, and the Liebherr LTM 1040-2.1, rated at 40 t maximum capacity.
When should I use a 30T or 40T all terrain crane?
The choice depends on the load weight, working radius, hook height, boom configuration, site access, ground conditions and setup area. Send the lift details so the relevant load chart can be checked.
Are two-axle cranes suitable for rooftop lifts?
They can be suitable for rooftop plant, air-conditioning units and building services where the required capacity and radius fall within the crane’s load chart and a compliant setup position is available.
Can Crane2U provide riggers or a dogman?
Yes. Supporting lifting personnel can be coordinated where required based on the load, site and lift plan.
Do you provide lift planning?
Yes. Engineered lift planning and documented lift studies can be arranged for complex, higher-risk or contractor-controlled projects.
Which areas do you cover?
Crane2U services Greater Melbourne and Regional Victoria, including Melton, Bacchus Marsh, Werribee, Caroline Springs, Maidstone, Gisborne, Geelong, Ballarat and surrounding areas.
How do I get an accurate crane hire quote?
Provide the site address, load weight and dimensions, pick and set positions, approximate radius, required height, access details, ground conditions and preferred date. Photos and plans help with the assessment.
Get Answers to Your Crane Hire Questions
Find answers to common questions about our crane hire services, equipment, operators, and project support.