2.5T Tracked Carrier Hire Melbourne | Aconda 2500 PRO
2,500 kg Electric Tracked Carrier for Heavy Material & Equipment Transport
Crane2U provides 2.5T tracked carrier hire across Melbourne and Regional Victoria using the Aconda 2500 PRO. The machine combines a manufacturer-rated 2,500 kg maximum capacity on level ground with a compact 950 mm overall width, making it a strong middle option for moving heavier plant, glazing, fabricated components, construction materials and industrial equipment through access routes that may be unsuitable for larger wheeled machinery.
For a comparison across all models, see tracked carrier hire Melbourne. The 1.25T model is the narrowest at 750 mm; the 3T ML 3.0 FX is manufacturer-listed at 800 mm, while the 4T model offers the highest level-ground capacity in this selection.
The 2500 PRO is battery powered, remote controlled and designed with a low, extendable platform. It is particularly useful where the job requires more carrying capacity than the 1.25T machine but access is still tight. Carrier selection must consider the full route, gradient, surface, load dimensions, turning space and the reduced capacity that applies on slopes.
Aconda 2500 PRO Specifications
Specification | Verified reference data |
|---|---|
Maximum capacity on level ground | 2,500 kg |
Maximum capacity at maximum gradient | 550 kg (per supplied fleet reference) |
Maximum gradient | 45° |
Maximum side slope | 30° |
Maximum speed | 3 km/h |
Unladen weight | 500 kg |
Overall width | 950 mm |
Bed width | 940 mm |
Bed / overall length | 1,360 mm |
Extended length | 2,120 mm |
Height | 365 mm |
Track width | 180 mm |
Track length on ground | 1,050 mm |
Ground clearance | 80 mm |
Maximum power | 3.4 kW |
Voltage | 24 V |
Battery capacity | 200 Ah |
Charger input | 110-230 V |
1.25T Tracked Carrier
2.5T Tracked Carrier
3T Tracked Carrier
4T Tracked Carrier
Why Choose the 2.5T Tracked Carrier?
- 2,500 kg maximum capacity on level ground for heavier site materials and equipment.
- 950 mm overall width for constrained access where larger forklifts or plant may not fit.
- Large 200 Ah battery capacity for repetitive transport work and longer material-handling tasks.
- Battery-electric direct drive and proportional remote control for precise manoeuvring.
- Extendable platform for supporting longer loads within the approved setup and configuration.
Common 2.5T Tracked Carrier Applications
Machinery and equipment relocation
Glass and facade systems
Structural and fabricated components
Switchboards, electrical equipment and plant
Large pavers, stone and landscaping materials
Support transport for crawler spider crane projects
2.5T Tracked Carrier Hire Across Melbourne & Victoria
Crane2U can assess 2.5T tracked carrier hire for suitable projects across Melbourne, Werribee, Truganina, Derrimut, Laverton, Altona, Maidstone, Caroline Springs, Melton, Bacchus Marsh, Maddingley, Geelong, Ballarat, Gisborne and surrounding Victorian areas. Send the load, route and access details so the 2.5T carrier can be checked against the actual job conditions.
If you have site measurements and load details ready, request a Crane2U hire quote so the correct configuration can be assessed.
View all Crane2U crane hire service areas or send the project address to confirm mobilisation and availability.
When to Step Up or Down in Size
Choose the 1.25T 1250 PRO when access is narrow and the load is within its limits. Choose the 2.5T 2500 PRO when the site and load suit its carrying capacity. The 3T ML 3.0 FX is listed at 800 mm wide and up to 3,000 kg under specified conditions; for larger level-ground loads compare the 4T 4000 PRO. The best carrier depends on the actual route, load geometry and slope.
Need a Reliable Crane for Your Next Project?
Tell us what you are lifting, where it needs to go and what access is available. Crane2U can recommend a suitable crane and supporting services for the job.
Crane Hire & Restricted-Access Support
Restricted-access lifts often need more than a crane. Crane2U can coordinate supporting services around the actual site conditions and lifting plan.
Wet & Dry Crane Hire
Flexible crane hire options matched to the project, crew requirements and operating arrangements.
Engineered Lift Planning
Planning support for complex or higher-risk lifts, including lift methodology and site considerations.
Dogman & Riggers
Qualified lifting support for rigging, load control, signalling and safe crane operations.
Electrical Spotters
Qualified spotter support for crane and plant operations near electrical hazards and powerlines.
Transport Services
Transport support for machinery, equipment and project materials across Melbourne and Regional Victoria.
Tracked Carrier Hire
Tracked material-handling support where loads need to move through soft, rough or restricted-access areas.
How much can the Aconda 2500 PRO carry?
The manufacturer-rated maximum is 2,500 kg on level ground. Capacity reduces on gradients, and the route must be checked before the carrier is confirmed.
How wide is the 2.5T tracked carrier?
The Aconda 2500 PRO is listed at 950 mm overall width. Always measure the tightest route and allow for the load itself, turns and operational clearance.
Is the 2500 PRO battery powered?
Yes. The referenced machine uses 24 V electric drive with a 200 Ah battery and proportional remote control.
Can the 2.5T carrier work on slopes?
The manufacturer lists a maximum gradient of 45° and a maximum side slope of 30°, but the permitted load reduces substantially on gradients. Site-specific assessment is required.
Can Crane2U supply a crane as well as the carrier?
Yes. For jobs where the load must be moved through restricted access and then lifted into position, Crane2U can coordinate tracked-carrier transport with suitable crane support.
Get Answers to Your Crane Hire Questions
Find answers to common questions about our crane hire services, equipment, operators, and project support.