4T Tracked Carrier Hire Melbourne | Aconda 4000 PRO
4,000 kg Electric Tracked Carrier for Heavy Plant, Machinery & Restricted-Access Transport
Crane2U provides 4T tracked carrier hire in Melbourne and Regional Victoria using the Aconda 4000 PRO, the highest-capacity tracked carrier in the current Crane2U range. The manufacturer rates the machine to 4,000 kg on level ground while the carrier remains approximately 1,000 mm wide, making it useful for moving heavy plant, machinery, fabricated components and large materials through controlled access routes where conventional handling equipment may be too large or unsuitable.
The 4000 PRO uses battery-electric drive, proportional remote control, an extendable load platform and gradient monitoring. Depending on the exact machine configuration, a powered/remote-controlled rotating platform may also be available. Final suitability must be confirmed against the actual carrier specification, the load geometry, route gradient, turning space, floor or ground conditions and the reduced capacity that applies away from level ground.
Compare the full tracked carrier hire range, including the compact 1.25T Aconda 1250 PRO, 2.5T Aconda 2500 PRO and 3T ML 3.0 FX for smaller or more access-sensitive loads.
Aconda 4000 PRO Specifications
Specification | Verified manufacturer data |
|---|---|
Maximum capacity on level ground | 4,000 kg |
Maximum capacity at maximum gradient | 1,000 kg |
Maximum gradient | 45° |
Maximum side slope | 30° |
Maximum speed | 2.5 km/h |
Unladen weight | 970 kg |
Overall width | 1,000 mm |
Bed width | 970 mm |
Width extended | 2,070 mm |
Bed / overall length | 1,790 mm |
Length extended | 2,860 mm |
Height | 500 mm |
Track width | 230 mm |
Track length on ground | 1,400 mm |
Ground clearance | 100 mm |
Maximum power | 6.0 kW |
Voltage | 24 V |
Battery capacity | 200 Ah |
Charger input | 110-230 V |
Choose Your Tracked Carrier
1.25T Tracked Carrier
2.5T Tracked Carrier
3T Tracked Carrier
4T Tracked Carrier
Why Choose the 4T Track Carrier?
- 4,000 kg maximum level-ground capacity for larger plant, machinery and heavy materials.
- 1,000 mm overall width, giving the machine a compact footprint relative to its carrying capacity.
- Extendable platform and support system for larger or awkward loads within approved limits.
- Battery-electric operation for quiet, emission-free material transport in many indoor or enclosed environments.
- Gradient monitoring and remote information feedback for controlled travel on challenging routes.
- Optional powered rotating platform on relevant configurations for manoeuvring long or awkward loads in tight areas.
Common 4T Tracked Carrier Applications
Heavy machinery and industrial plant movement
Large switchboards, transformers and electrical equipment
Steel, fabricated assemblies and construction components
Factory, warehouse and shutdown material handling
Heavy glazing or facade systems with appropriate load support
Restricted-access project logistics paired with crawler or mobile crane support
4T Tracked Carrier Hire Across Melbourne & Victoria
Crane2U can assess 4T tracked carrier hire across Melbourne and Regional Victoria for suitable commercial, industrial, construction and infrastructure projects. Service areas include Werribee, Truganina, Derrimut, Laverton, Altona, Maidstone, Sunshine, Melton, Bacchus Marsh, Maddingley, Geelong, Ballarat, Gisborne and surrounding Victorian locations. For heavy-load work, provide accurate load data and route information early so access, ground or floor capacity and transport requirements can be reviewed.
To check the route, ground and load requirements, contact Crane2U for a 4T tracked carrier quote.
View all Crane2U crane hire service areas or send the project address to confirm mobilisation and availability.
What We Need to Check Before Booking the 4T Carrier
- Verified load weight and dimensions
- Load support points and centre-of-gravity considerations where relevant
- Narrowest width/height and all turning points
- Route gradient, side slope and surface condition
- Floor or slab capacity for internal work
- Platform extension/rotation requirements
- Travel distance and operational clearances
- Delivery access, unloading area and preferred schedule
Need a Reliable Crane for Your Next Project?
Tell us what you are lifting, where it needs to go and what access is available. Crane2U can recommend a suitable crane and supporting services for the job.
Crane Hire & Restricted-Access Support
Restricted-access lifts often need more than a crane. Crane2U can coordinate supporting services around the actual site conditions and lifting plan.
Wet & Dry Crane Hire
Flexible crane hire options matched to the project, crew requirements and operating arrangements.
Engineered Lift Planning
Planning support for complex or higher-risk lifts, including lift methodology and site considerations.
Dogman & Riggers
Qualified lifting support for rigging, load control, signalling and safe crane operations.
Electrical Spotters
Qualified spotter support for crane and plant operations near electrical hazards and powerlines.
Transport Services
Transport support for machinery, equipment and project materials across Melbourne and Regional Victoria.
Tracked Carrier Hire
Tracked material-handling support where loads need to move through soft, rough or restricted-access areas.
Can the 4T tracked carrier carry 4,000 kg on a slope?
No. The 4,000 kg rating is the maximum on level ground. The referenced data lists 1,000 kg at the maximum gradient, so the actual load and route must be checked before use.
How wide is the Aconda 4000 PRO?
The manufacturer lists an overall width of 1,000 mm. The load and any extended platform configuration can require substantially more operational clearance.
Is the 4000 PRO suitable for indoor industrial work?
It can be suitable because it is battery electric, but floor capacity, route clearances, surface protection, pedestrian separation and site procedures still need to be assessed.
Does the 4T tracked carrier have a rotating platform?
A powered/remote-controlled rotating platform is available on relevant 4000 PRO configurations. Confirm the exact fleet machine and attachment before promising this feature for a project.
Can Crane2U combine the 4T carrier with crane hire?
Yes. A common restricted-access workflow is to use the tracked carrier for horizontal movement and a spider, Franna or other suitable crane for final lifting and placement.
Get Answers to Your Crane Hire Questions
Find answers to common questions about our crane hire services, equipment, operators, and project support.