2.8T Maeda MC285C-3 Spider Crane Hire Melbourne
Compact 750 mm-Wide Mini Crawler Crane for Tight Access, Indoor Work & Precision Lifting
Crane2U provides 2.8T spider crane hire in Melbourne using the Maeda MC285C-3, a compact mini crawler rated by Maeda at 2.82 t × 1.4 m. Its 750 mm stowed width makes this model particularly useful where the access route is the main constraint: narrow gates, internal openings, basements, courtyards and completed building areas where a road-going crane cannot reach the setup point.
The MC285C-3 has an 8.205 m maximum working radius at 0.15 t and an 8.7 m maximum lifting height on the main boom. Actual lifting capacity reduces as working radius and configuration change, so every job should be checked against the current load chart before the crane is confirmed.
Maeda MC285C-3 Specifications
Specification | Manufacturer data |
|---|---|
Crane capacity | 2.82 t × 1.4 m |
Maximum working radius | 8.205 m × 0.15 t |
Maximum lifting height | 8.7 m |
Maximum reach below ground | -10.1 m (4 falls) |
Boom length | 2.535 m to 8.575 m |
Stowed dimensions | 2,800 mm (L) × 750 mm (W) × 1,470 mm (H) |
Machine weight | 1,990 kg diesel configuration; electric configuration varies |
Maximum outrigger spread | Lateral 4,782 mm; front 4,718 mm; rear 3,990 mm |
Travel speed | 0-2.2 km/h |
Power options | Diesel; electric motor option depending on machine configuration |
*Maximum capacities are manufacturer headline ratings at the stated short radius. They are not the capacity available at every radius. Confirm the exact Crane2U machine configuration and current load chart before quoting or publishing any lift-specific capacity.
Compare the 2.8T, 3T & 4T Crawler Cranes
The correct mini crawler is selected from the actual load, working radius, hook height, access route, setup area and floor or ground conditions. Nominal tonne rating alone does not determine suitability. Compare the range below, then confirm the lift against the current crane specifications and load chart.
2.8T Crawler Spider Crane
3T Crawler Spider Crane
4T Crawler Spider Crane
Why Choose the MC285C-3?
- 750 mm stowed width gives this machine the strongest access advantage in the three-crane range.
- Useful for internal glazing, plant rooms, courtyards, residential side access and fit-out work where the route to the setup point is restricted.
- Compact travel dimensions make access planning easier than with the larger MC305C-2 and MC405C-3, provided the full route has adequate clearance.
- Multi-angle outrigger capability and crawler travel can support precise setup in constrained areas within the approved manufacturer configuration.
- Optional electric power and non-marking track solutions exist for some MC285 configurations; confirm which options are available on the Crane2U unit before advertising them.
Common 2.8T Crawler Applications
Glass & Shopfront Installation
Glass panels, windows, shopfronts, balustrades and glazing materials that need precise placement in constrained areas.
Plant Rooms & Basements
Pumps, small generators, switchboards, tanks and mechanical equipment moved into areas with limited conventional crane access.
HVAC & Mechanical Services
Suitable rooftop, courtyard and plant-room equipment where the crane must work close to the placement point.
Internal Construction & Fit-Out
Steel lintels, beams, equipment and fixtures on commercial and industrial fit-outs where access is controlled.
How the Crawler Crane Hire Process Works
Step | What to provide / what happens |
1. Send the access and lift details | Site address, load weight and dimensions, pick point, landing point, approximate working radius, required hook height, narrowest access width/height, ground or floor conditions and site photos. |
2. Match the machine | Crane2U checks whether the 2.8T crawler crane is appropriate against the available fleet, current specifications and load-chart requirements. |
3. Confirm site support | Operator, rigging, dogman, electrical spotter, lift planning, ground/floor protection and transport requirements are confirmed where applicable. |
4. Deliver, position and complete the lift | The agreed crawler crane is transported to site, tracked into the approved setup area and used to complete the lifting scope in line with the confirmed plan. |
Need a Reliable Crane for Your Next Project?
Tell us what you are lifting, where it needs to go and what access is available. Crane2U can recommend a suitable crane and supporting services for the job.
Crane Hire & Restricted-Access Support
Restricted-access lifts often need more than a crane. Crane2U can coordinate supporting services around the actual site conditions and lifting plan.
Wet & Dry Crane Hire
Flexible crane hire options matched to the project, crew requirements and operating arrangements.
Engineered Lift Planning
Planning support for complex or higher-risk lifts, including lift methodology and site considerations.
Dogman & Riggers
Qualified lifting support for rigging, load control, signalling and safe crane operations.
Electrical Spotters
Qualified spotter support for crane and plant operations near electrical hazards and powerlines.
Transport Services
Transport support for machinery, equipment and project materials across Melbourne and Regional Victoria.
Tracked Carrier Hire
Tracked material-handling support where loads need to move through soft, rough or restricted-access areas.
2.8T Spider Crane Hire Across Melbourne & Victoria
Crane2U can assess MC285C-3 hire across Melbourne and Regional Victoria, including Werribee, Melton, Bacchus Marsh, Caroline Springs, Maidstone, Sunshine, Footscray, Altona, Truganina, Point Cook, Gisborne, Geelong, Ballarat and surrounding areas. The 750 mm machine width is useful for narrow-access enquiries, but the entire travel route and final outrigger setup still need to be measured before confirmation.
View all Crane2U crane hire service areas or send the project address to confirm mobilisation and availability.
What is a 2.8T crawler crane used for?
It is commonly considered for restricted-access lifting, indoor projects, glass installation, plant-room equipment, residential work and other jobs where a compact tracked crane can be positioned closer to the load.
Can the 2.8T crawler lift 2.8 tonnes at any radius?
Start with the load weight and dimensions, working radius, required hook height, narrowest access point, setup area and floor or ground conditions. Crane2U can then check which model is suitable against the current specifications and load chart.
How narrow is the 2.8T crawler crane?
Potentially, depending on the actual crane configuration and building conditions. Headroom, access width, floor loading, ventilation, power requirements, surface protection and the approved setup area should all be confirmed before the booking.
Can it work on finished floors or paving?
Tracked travel can distribute machine weight differently from wheeled equipment, but crawler cranes still need a site-specific assessment. Protection such as mats, ply or spreader systems may be required, and suspended slabs or sensitive surfaces should be checked before access is approved.
Can it work indoors?
Potentially, subject to the actual machine configuration and site requirements including headroom, ventilation, power, floor loading and the approved operating setup.
Where can I hire a 2.8T crawler crane?
Crane2U services Melbourne and Western Victoria including Maidstone, Werribee, Caroline Springs, Melton, Bacchus Marsh, Geelong, Ballarat, Gisborne and surrounding areas.
What information should I send for a crawler crane quote?
Send the site address, load weight and dimensions, pick and landing points, approximate radius and height, narrowest access dimensions, ground or floor conditions, preferred date and clear photos or drawings of the access route and lift area.
Get Answers to Your Crane Hire Questions
Find answers to common questions about our crane hire services, equipment, operators, and project support.