40T All Terrain Crane Hire Melbourne
Liebherr LTM 1040-2.1 | High-Capacity 2-Axle Mobile Crane
Crane2U provides Liebherr LTM 1040-2.1 all terrain crane hire across Melbourne and Regional Victoria for commercial construction, rooftop plant, structural steel, machinery installation and project lifting that needs strong capability from a compact two-axle carrier. Liebherr rates the LTM 1040-2.1 at a maximum load capacity of 40 tonnes, with a 35 m telescopic boom, up to 44 m maximum hoist height and up to 39 m maximum radius depending on configuration.
The 40T rating is not the available capacity at every working radius. Send the load weight and dimensions, required radius, hook height, pick and set positions, access route, setup area, ground conditions and site drawings or photos. Crane2U can check the relevant load chart and confirm whether the LTM 1040-2.1 or another crane is the better fit.
Liebherr LTM 1040-2.1 Specifications
Specification | Verified manufacturer data |
|---|---|
Maximum load capacity | 40 t |
Rated capacity reference | 40 t at 2.5 m radius |
Telescopic boom | 10.5 m to 35.0 m |
Lattice / folding jib | 9.5 m |
Maximum hoist height | 44 m |
Maximum radius | 39.0 m |
Number of axles | 2 |
Drive / steering | 4 x 4 x 4 |
Driving speed | up to 85 km/h |
Total ballast | 6.5 t |
Important: maximum rated capacity is only available in specific configurations and at short radius. Actual lifting capacity depends on working radius, boom configuration, counterweight, outrigger setup and the manufacturer load chart.
Choose Your 2-Axle All Terrain Crane
35T All Terrain Crane
40T All Terrain Crane
Unsure which crane suits your job? Send us your load weight, dimensions, and site photos, and we will recommend the best crane, supported by load charts. Not sure which Franna fits? Work it out in seconds with our Franna crane calculator, or send us your load details and we will match the crane for you.
Crane Hire & Site Support in One Place
Crane2U can coordinate the crane with project support based on the lift scope. Relevant services include wet or dry crane hire where applicable, engineered lift planning, dogmen and riggers, electrical spotters, transport support and site-specific lifting assistance.
Wet & Dry Crane Hire
Flexible crane hire options matched to the project, crew requirements and operating arrangements.
Engineered Lift Planning
Planning support for complex or higher-risk lifts, including lift methodology and site considerations.
Dogman & Riggers
Qualified lifting support for rigging, load control, signalling and safe crane operations.
Electrical Spotters
Qualified spotter support for crane and plant operations near electrical hazards and powerlines.
Transport Services
Transport support for machinery, equipment and project materials across Melbourne and Regional Victoria.
Welding & Fabrication
On-site welding and fabrication support for steel work, modifications, repairs and project requirements.
WHY THIS EQUIPMENT
Best Uses for the 40T LTM 1040-2.1
When to Choose the 40T Instead of the 35T
40T Crane Hire Across Melbourne & Regional Victoria
Crane2U can support suitable 40T all terrain crane projects across Melbourne, Melton, Bacchus Marsh, Maddingley, Werribee, Caroline Springs, Maidstone, Gisborne, Geelong, Ballarat and surrounding areas. For regional work, send the project location and schedule so mobilisation can be included in the quote. View all service areas or send the site address for a mobilisation assessment.
Need a pick-and-carry option?: Franna Crane Hire Melbourne
Need more capacity?: All Terrain Crane Hire Melbourne
Need a Reliable Crane for Your Next Project?
Tell us what you are lifting, where it needs to go and what access is available. Crane2U can recommend a suitable crane and supporting services for the job.
Crane Hire Process
- Send the lift information and site photos/plans.
- Crane2U checks whether this crane is suitable or recommends another fleet option if the lift requires a different capacity, reach or footprint.
- Crew, rigging, spotter, lift-planning and transport requirements are confirmed where applicable.
- The crane is mobilised, set up and operated according to the agreed project scope.
Available Support:
- Experienced crane operator for wet hire where applicable
- Dogman and rigging support available as required
- Electrical spotters available for relevant electrical hazards
- Engineered lift planning available for complex lifts
- Transport and site support can be coordinated with the booking
We proudly support the construction, civil, commercial, residential and industrial construction sectors, along with infrastructure, mining, manufacturing, logistics and warehousing clients throughout Victoria. If your load is not listed here, give us a ring; chances are we have lifted one just like it.
Call us now at 0457 000 637.
How much can the Liebherr LTM 1040-2.1 lift?
Liebherr lists a maximum capacity of 40 t at 2.5 m radius. Actual capacity at the project radius depends on boom length, counterweight, outrigger setup and the applicable load chart.
How long is the boom on the LTM 1040-2.1?
The four-section telescopic boom extends to 35 m. Liebherr lists a maximum hoist height of 44 m and maximum radius of 39 m depending on configuration.
What jobs suit a 40T all terrain crane?
Typical work can include rooftop equipment, structural steel, roof trusses, machinery installation and construction materials where the lift falls within the crane chart.
Is the 40T crane suitable for tight sites?
A two-axle carrier is relatively compact compared with larger all terrain cranes, but the crane still needs suitable outrigger space, ground support and safe access. Site photos and dimensions should be reviewed before booking.
Can you provide riggers, dogmen and electrical spotters?
Yes. Crane2U can coordinate supporting personnel where required for the project and site conditions.
Do you cover Geelong and Ballarat?
Yes. Crane2U services Melbourne and Regional Victoria, including Geelong, Ballarat, Bacchus Marsh, Melton, Werribee and other western and regional locations.
Get Answers to Your Crane Hire Questions
Find answers to common questions about our crane hire services, equipment, operators, and project support.