30T All Terrain Crane Hire Melbourne
Liebherr LTM 1030-2.1 | Compact 2-Axle Mobile Crane
Crane2U provides Liebherr LTM 1030-2.1 all terrain crane hire across Melbourne and Regional Victoria for construction, rooftop equipment, structural steel, machinery installation and general lifting where a compact two-axle carrier is useful. Liebherr rates the LTM 1030-2.1 at a maximum load capacity of 35 tonnes, with a 30 m telescopic boom, up to 44 m maximum hoist height and up to 40 m maximum radius depending on configuration.
The LTM 1030-2.1 should be selected from the load chart at the actual working radius rather than by the 30T headline capacity. Crane2U can review the load weight, pick and set positions, radius, hook height, access, ground conditions and setup space before confirming whether this crane is suitable.
Liebherr LTM 1030-2.1 Specifications
Specification | Verified manufacturer data |
|---|---|
Maximum load capacity | 35 t |
Rated capacity reference | 35 t at 3.0 m radius |
Telescopic boom | 9.2 m to 30.0 m |
Lattice jib | 8.6 m to 15.0 m |
Maximum hoist height | 44 m |
Maximum radius | 40.0 m |
Number of axles | 2 |
Drive / steering | 4 x 4 x 4 |
Driving speed | up to 85 km/h |
Total ballast | 5.5 t |
Important: maximum rated capacity is only available in specific configurations and at short radius. Actual lifting capacity depends on working radius, boom configuration, counterweight, outrigger setup and the manufacturer load chart.
Choose Your 2-Axle All Terrain Crane
35T All Terrain Crane
40T All Terrain Crane
Unsure which crane suits your job? Send us your load weight, dimensions, and site photos, and we will recommend the best crane, supported by load charts. Not sure which Franna fits? Work it out in seconds with our Franna crane calculator, or send us your load details and we will match the crane for you.
Crane Hire & Site Support in One Place
Crane2U can coordinate the crane with project support based on the lift scope. Relevant services include wet or dry crane hire where applicable, engineered lift planning, dogmen and riggers, electrical spotters, transport support and site-specific lifting assistance.
Wet & Dry Crane Hire
Flexible crane hire options matched to the project, crew requirements and operating arrangements.
Engineered Lift Planning
Planning support for complex or higher-risk lifts, including lift methodology and site considerations.
Dogman & Riggers
Qualified lifting support for rigging, load control, signalling and safe crane operations.
Electrical Spotters
Qualified spotter support for crane and plant operations near electrical hazards and powerlines.
Transport Services
Transport support for machinery, equipment and project materials across Melbourne and Regional Victoria.
Welding & Fabrication
On-site welding and fabrication support for steel work, modifications, repairs and project requirements.
WHY THIS EQUIPMENT
Best Uses for the 35T LTM 1030-2.1
Why Choose a Compact 2-Axle Crane?
35T Crane Hire Across Melbourne & Regional Victoria
Crane2U can mobilise the LTM 1030-2.1 for suitable projects across Melbourne, Melton, Bacchus Marsh, Maddingley, Werribee, Caroline Springs, Maidstone, Gisborne, Geelong, Ballarat and surrounding areas. Availability and mobilisation requirements depend on the project location, schedule and lift scope. View all service areas or send the site address for a mobilisation assessment.
Need a pick-and-carry option?: Franna Crane Hire Melbourne
Need more capacity?: All Terrain Crane Hire Melbourne
Need a Reliable Crane for Your Next Project?
Tell us what you are lifting, where it needs to go and what access is available. Crane2U can recommend a suitable crane and supporting services for the job.
Crane Hire Process
- Send the lift information and site photos/plans.
- Crane2U checks whether this crane is suitable or recommends another fleet option if the lift requires a different capacity, reach or footprint.
- Crew, rigging, spotter, lift-planning and transport requirements are confirmed where applicable.
- The crane is mobilised, set up and operated according to the agreed project scope.
Available Support:
- Experienced crane operator for wet hire where applicable
- Dogman and rigging support available as required
- Electrical spotters available for relevant electrical hazards
- Engineered lift planning available for complex lifts
- Transport and site support can be coordinated with the booking
We proudly support the construction, civil, commercial, residential and industrial construction sectors, along with infrastructure, mining, manufacturing, logistics and warehousing clients throughout Victoria. If your load is not listed here, give us a ring; chances are we have lifted one just like it.
Call us now at 0457 000 637.
How much can the Liebherr LTM 1030-2.1 lift?
Liebherr lists a maximum load capacity of 35 t at 3.0 m radius. The capacity falls as radius, boom length and configuration change, so the project must be checked against the correct load chart.
How long is the LTM 1030-2.1 boom?
The telescopic boom extends to 30 m. Liebherr also lists a lattice jib from 8.6 m to 15 m, with maximum hoist height up to 44 m depending on configuration.
Is the LTM 1030-2.1 a 30T or 35T crane?
Liebherr rates the LTM 1030-2.1 at 35 t maximum load capacity. If an internal Crane2U file is labelled “30T”, update the public-facing page and card to 35T unless it refers to a different crane model.
Can Crane2U provide lift planning for this crane?
Typical applications can include rooftop plant, structural steel, machinery installation, roof trusses and construction materials where the required radius and load fall within the crane chart.
Can Crane2U provide riggers or a dogman?
Yes. Lift planning and supporting crew can be coordinated where required by the site, principal contractor or complexity of the lift.
Where can I hire the 35T crane?
Crane2U services Melbourne and Regional Victoria, including Melton, Bacchus Marsh, Werribee, Caroline Springs, Maidstone, Gisborne, Geelong and Ballarat.
Get Answers to Your Crane Hire Questions
Find answers to common questions about our crane hire services, equipment, operators, and project support.